Easyjoint Electric Co., Ltd.

 

Insulated NyLon high temp ring terminals provide superior insulation versus vinyl ring terminals, this insulation sleeve can withstand a maximum operating temperature of105°C.They are electroplated tin with excellent electrical conductivity and corrosion resistance. The terminals are made of copper, while the insulation type benefits from additional external nylon bushings that ensure insulation support and good crimp connections.The design of the connection port also makes the wire easier to entry, improving the crimping rate and connection reliability.

 

 

 

Ring terminals nylon insulated (easy entry)

Insulated NyLon high temp ring terminals nylon material can be used at high temperatures, and the stepped threading port also makes the wire access easier.

 

Ring terminals nylon insulated with double crimp

Insulated NyLon high temp ring terminals in addition to the high quality nylon insulating ring, it also contains tinned copper bushings, which strengthen the ring terminal bucket and secure the wire to prevent stress and high vibration. Works best when the terminal is double crimped once on the wire, and a second time on the insulation of the wire.

 

 

 

 

Ring terminals, also known as ear terminals, are electrical terminals that connect wires to studs or screws. One end of the ring terminal is provided with a closed or open crimping cylinder for electrical connection with the wire. The other end is a ring tongue that is fitted to the device by a bolt or screw that goes through the ring. They are the most heat-resistant insulated ring terminals. Compared with pvc material, it is easy to shrink at higher temperatures, and nylon ring terminals are the best choice in environments with temperature requirements. Nylon ring terminals are easy to crimp and provide an insulating cover over the crimp area, making them a higher performing insulating terminal.

 

Solar Power

Charging Pile

Wind Power

Power Connection

 

 

IATF 16949

ISO 9001

CE

UL

Invent

 

 

 

UL standard laboratory was established in 2005, the product testing equipment are: microscope, Vickers hardness tester, spectrometer, electroplating thickness meter, turbine conductivity meter, pressure tester, salt spray tester, insulation tester, flame retardant test, UL standard tool pliers, inserting and pulling force tester, tension machine.

 

 

 

https://www.cksterminal.com/